• Image of Spinfab BBS Motorsport billet centercap adapter e88,e05,e28,centerlock
  • Image of Spinfab BBS Motorsport billet centercap adapter e88,e05,e28,centerlock
  • Image of Spinfab BBS Motorsport billet centercap adapter e88,e05,e28,centerlock
  • Image of Spinfab BBS Motorsport billet centercap adapter e88,e05,e28,centerlock
  • Image of Spinfab BBS Motorsport billet centercap adapter e88,e05,e28,centerlock

Most Bbs motorsports wheels do not allow for a street centercap setup from the factory. Most notably the Bbs e88, e05, and e28. From the factory, these wheels come with 3 small tapped holes built into the wheel face, but no option for centercap.

Our spinfab billet centercap adapter attaches to these wheel faces via those 3 small holes and just like all of our cap designs, allows for use of the 70mm 3 prong oem Bbs logos.

These are originally made for but not limited to the following (this list will grow once we verify)

e88 Porsche
E88 centerlock
e05
E28 Porsche
E28 centerlock

Bbs has been known in the past to drill out vintage Porsche centerlock Sets to 5x130, and for this reason these are on the list. The 3 hole pattern that holds the centerlock cup on is the same pattern as what holds on this cap, so one could drill centerlock to 5 lug and run this cap to cover the centerlock area. Picture on e28 cl shown for reference.

Set of four billet adapters and (12) stainless m5x12 button head bolts. Resin logos sold separately

These can be adapted to other Motorsport wheels, vintage Motorsport wheels, etc; so please be advised your wheels may need to be drilled/tapped for this centercap to be added if they didn't come from the factory with those 3 tapped holes directly around the centerbore. We have 2 sets of Motorsport wheels for example that have been adapted to fit this cap-About 5 minutes work with a drill press/Tap. The cap is 95mm in overall diameter, so please be advised that these were designed for Porsche fitment originally and may need slight modification to the cap if you're planning on fitting to another set of wheels with a small diameter bolt pattern (5x100 for example)

These have also been machined to remove any unnecessary weight from the cap. motorsport wheels are motorsport wheels for a reason, and these caps only add a few oz to the wheel. These infact weight less than the oem bbs resin logos.

As with all of our products, these are designed and produced on Long Island NY