Most Bbs motorsports wheels do not allow for a street centercap setup from the factory. If you have a Porsche fitment e50 set or a Porsche fitment e88,e28 and don't want visible hardware, this ad may be for you.
Our spinfab billet centercap adapter attaches to e50 5x130 wheel faces via O ring on the backside and just like all of our cap designs, allows for use of the 70mm 3 prong oem Bbs logos
Set of four billet adapters and (4) neoprene O rings. Resin logos sold separately
These caps can be adapted to fit many other Motorsport wheels, vintage Bbs or Compomotive Motorsport wheels, etc; so please be advised your caps may need small modification if you don't have a 5x130 specific set. Please email firstname.lastname@example.org if you need some assistance in choosing a particular cap for your Motorsport set. The cap is 95mm in overall diameter, so please be advised that these were designed for Porsche fitment originally and may need modification if you're planning on fitting to another set of wheels with a small bolt pattern (5x100 for example) We have machined these as a one off with 2 m4 set screws on the backside for example to attach to the inner bore of another wheel in the Motorsport lineup. Anything is possible though and we will keep fitting these to Motorsport wheels and adding it to the list once we do.
These have also been machined to remove any unnecessary weight from the cap. motorsport wheels are motorsport wheels for a reason, and these caps only add a few oz to the wheel. These infact weight less than the oem bbs resin logos.
As with all of our products, these are designed and produced on Long Island NY